Non-Corrosion Resisting Alloy 7S1
Technical Data Sheet
| Chemical Composition Limits | ||||||
| Weight% | C | Si | Mn | P+S | Pb by agreement | Limited Ruling Section |
| 7S1 GpA |
0.15-0.25 | 0.1-0.35 | 0.6-0.9 | 0.04 max | 0.15-0.35 | 0-19mm |
| 7S1 GpB |
0.25-0.35 | 0.1-0.35 | 0.6-0.9 | 0.04 max | 0.15-0.35 | 19-29 mm |
| 7S1 GpC |
0.3-0.4 | 0.1-0.35 | 0.6-0.9 | 0.04 max | 0.15-0.35 | 29-101mm |
| Other Chemically similar Specifications | ||||||
| Weight% | C | Si | Mn | P+S | Others | |
| SAE 1030 AISI 1030 |
0.28-0.34 | 0.15-0.3 | 0.6-0.9 | P 0.04 S 0.05 |
- | |
| SAE 1035 AISI 1035 |
0.32-0.38 | 0.15-0.3 | 0.6-0.9 | P 0.04 S 0.05 |
- | |
| SAE 1038 AISI 1038 |
0.35-0.42 | 0.15-0.3 | 0.6-0.9 | P 0.04 S 0.05 |
- | |
| MIL-S-16974 E1040 |
0.37-0.44 | 0.15-0.3 | 0.6-0.9 | P 0.04 S 0.05 |
- | |
Typical Mechanical Properties
| Grade | Tensile Strength (tonf/in) | 0.2 % Yield Strength (tonf / in² ) | Elongation on 5.65 √50 | Ruling Section |
| 7S1 GpA | 35 | 29 | 7 | 3/4" |
| 7S1 GpA | 35 | 23 | 8 | 3/4" - 1.125" |
| 7S1 GpC | 35 | 19 | 11 | 1.125"-4" |
Availability
Alloy 7S1 for all stock availability contact Sales.
Customer Reviews - What Customers Say About Us!
"I would like to extend my gratitude to the entire staff at Aircraft Materials. It is a true pleasure to work with professionals in the aerospace industry. Keep up the great work!"
"Thank you very much, everything seems perfect. The quality of your cutting is superb."
"Could not fault your service."
"The service was perfect you had stock and same day collection"
"Item was very well packed"
| CLICK HERE TO VIEW OUR BROCHURE |
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
