Part Number WS 1.3505
Technical Data Sheet
Chemical Composition Limits | |||||||
Weight % | C | Si | Mn | P | S | Cr | Fe |
CCR-1150 | 0.95-1.10 | 0.15-0.35 | 0.25-0.45 | 0.03 max | 0.025 max | 1.35-1.65 | Rem |
Other Chemically similar Specifications | |||||||
Weight % | C | Si | Mn | P | S | Cr | Fe |
WS 1.3505 | 0.95-1.10 | 0.15-0.35 | 0.25-0.45 | 0.03 max | 0.025 max | 1.35-1.65 | Rem |
EN 100 Cr 6 | 0.95-1.10 | 0.15-0.35 | 0.25-0.45 | 0.03 max | 0.025 max | 1.35-1.65 | Rem |
AISI 52100 | 0.95-1.10 | 0.15-0.35 | 0.25-0.45 | 0.03 max | 0.025 max | 1.35-1.65 | Rem |
AFNOR 100 C 6 | 0.95-1.10 | 0.15-0.35 | 0.25-0.45 | 0.03 max | 0.025 max | 1.35-1.65 | Rem |
CCR-1150 is a ball bearing steel which is manufactured in Rod, Bar and coil. For all stock and size availability contact Sales.
(WS 1.3505 Ball Bearing Steel, AISI 52100 Ball Bearing Steel)
Available in:
coils: Cold drawn + polished: 10-35kg/coil
Bars: Ø0-2.99mm: cold drawn and polished
Bars: Ø 3.00-19mm: cold drawn, ground and polished
Bar Lengths: 2m (3m) Surface finish N5-N6
Tolerance to:
Diameter : ISO h9 and h8
Out of Roundness/ eccentricity: 1/2 the diam. tolerance.
Tolerance in length: +/-30mm
Heat treatment
Hardening :830-870 ºC quenching in oil
:800-830 ºC quenching in water
:730-760 ºC soft annealing
:870-900 ºC normalising
Obtainable Hardness 58-66 HRC
Standard Stock Sizes:
Ø 1-40mm with steps of sometimes 0.50mm special sizes and narrow tolerances available on request
Cutting rate
25-40m/min (approximate value, depending on the lubrication oil, the cutting tools, and shape of parts.)
Return to Main Precision Ground Material
What's new.......... More News ........ COVID-19 Statement (read full statement here) |
|
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.