Part Number WS 1.4310
Technical Data Sheet
Chronifer Special FM is a stainless steel spring steel with chrome and nickel, which is manufactured in Rod, Bar and coil. (AISI 302 ~ Stainless Steel).
| Chemical Composition Limits | |||||||
| Weight % | C | Si | Mn | S | Cr | Ni | Fe |
| CHRONIFER SPECIAL FM | 0.15 max | 1.50 max | 2.00 max | 0.03 max | 16-19 | 6-9.50 | Rem |
| Other Chemically similar Specifications | |||||||
| Weight % | C | Si | Mn | S | Cr | Ni | Fe |
| WS 1.4310 | 0.15 max | 1.50 max | 2.00 max | 0.03 max | 16-19 | 6-9.50 | Rem |
| DIN 17224 X12 CrNi 17-7 X10 CrNi18-8 |
0.15 max | 1.50 max | 2.00 max | 0.03 max | 16-19 | 6-9.50 | Rem |
| ~AISI 302 | 0.15 max | 1.50 max | 2.00 max | 0.03 max | 16-19 | 6-9.50 | Rem |
| AFNOR Z11CN17-08 Z12CN 18-08 Z11CN18-09 |
0.15 max | 1.50 max | 2.00 max | 0.03 max | 16-19 | 6-9.50 | Rem |
Dimensions
Ø 0.70-4.00 mm: cold drawn polished, ground polished on request.
Availability
In bars of 2 or 3m lengths or in coil
Tolerances
DIN 2076 C, other on request
Heat Treatment
Annealing at 1050ºC quench in water cannot be hardened by heat treatment, hardened only by cold working
Tensile strength Rm
DIN 17224, others on request
soft, half-hard and hard with spring steel execution there are tensile strength of over 2000 N/mm2 possible.
Cutting rate
20-30 m/min (approx value depending on the lubrication oil, the cutting tools, the form of parts)
Welding
Good
Range Dimension
0.01 min up to 4.00 mm round in stock, other dimensions on request.
For all stock and size availability contact Sales.
Return to Main Precision Ground Material
Customer Reviews - What Customers Say About Us!
| CLICK HERE TO VIEW OUR BROCHURE |
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
