Part Number WS 1.4301
Technical Data Sheet
Chronifer Supra is an austenitic stainless steel which is manufactured in Rod, Bar and coil. (AISI 304 Stainless Steel).
| Chemical Composition Limits | ||||||||
| Weight % | C | Cr | Ni | S | Si | Mn | P | Fe |
| CHRONIFER SUPRA | 0.07 max | 17-19.5 | 8.5-10.5 | 0.03 max | 1.00 max | 2.00 max | 0.045 max | Rem |
| Other Chemically similar Specifications | ||||||||
| Weight % | C | Cr | Ni | S | Si | Mn | P | Fe |
| WS 1.4301 | 0.07 max | 17-19.5 | 8.5-10.5 | 0.03 max | 1.00 max | 2.00 max | 0.045 max | Rem |
| DIN X 5 CrNi 1810 | 0.07 max | 17-19.5 | 8.5-10.5 | 0.03 max | 1.00 max | 2.00 max | 0.045 max | Rem |
| AISI 304 | 0.07 max | 17-19.5 | 8.5-10.5 | 0.03 max | 1.00 max | 2.00 max | 0.045 max | Rem |
| AFNOR Z6 CN 18.09 | 0.07 max | 17-19.5 | 8.5-10.5 | 0.03 max | 1.00 max | 2.00 max | 0.045 max | rem |
Corrosion Resistance
It resists rusting, from all atmospheric sources and is recommended for use in connection with foodstuff, sterilizing, most of organic chemicals and dyestuff. For best results it is recommended that the surface of parts is polished and free from scale, foreign particles. This is accomplished with passivating.
Surface Execution
Ø< 2.00mm: cold drawn, polished
Ø>= 2.00mm: cold drawn, ground polished with surface roughness N5
Standard in bars of 3m lengths =/- 50mm
In coils for Escomatic machines (approx 35kg/coil)
Tolerances
Standard ISO h7 (special sizes and tolerance are in short time available)
Heat Treatment
For high corrosion resistance and low magnetism, there may be an annealing procedure necessary. This annealing is only useful after a strong cold working which raised the mechanical resistant
Annealing: Heat to 1010-1120ºC (1850-2050ºF)
Hardening: Cannot be hardened by heat treatment
Mechanical Properties
Tensile strength at delivery form 720-950 N/mm2
Tensile strength after annealing 540-750 N/mm2
Welding
Very good for welding, brazing resistance seam welding and others
Cutting Rate
20-30m/min (approx value, depending on the lubrication oil, the cutting tools, the form of parts.
Stock Range
Ø 1.00 to 13.00 mm round full material in stock, other dimension on request
For all stock and size availability contact Sales.
Return to Main Precision Ground Material
Customer Reviews - What Customers Say About Us!
| CLICK HERE TO VIEW OUR BROCHURE |
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
