Part Number WS 1.4005

Technical Data Sheet

Chronifer Labor 13% is a free cutting chromium stainless steel with 13 % Cr which is manufactured in Rod, Bar and coil. Chronifer Labor 13% is resists to water and stream corrosion after tempering and a forced polishing of the parts. For optimum corrosion resistance, surfaces must be free of scale and foreign particles and finished parts should be passivated. Condition T is pre-tempered to 26-32 HRC. (AISI 416 Stainless Steel, WS 1.4005)

Chemical Composition Limits
Weight %	C	Si	Mn	P	S	Cr	Fe
CHRONIFER LABOR 13%	0.15 max	1.00 max	1.50 max	0.06 max	0.15-0.35	12.00-14.00	Rem
Other Chemically similar Specifications
Weight %	C	Si	Mn	P	S	Cr	Fe
WS 1.4005	0.15 max	1.00 max	1.50 max	0.06 max	0.15-0.35	12.00-14.00	Rem
DIN X 12 CrS 13	0.15 max	1.00 max	1.50 max	0.06 max	0.15-0.35	12.00-14.00	Rem
AISI 416	0.15 max	1.00 max	1.50 max	0.06 max	0.15-0.35	12.00-14.00	Rem
AFNOR Z11 C13	0.15 max	1.00 max	1.50 max	0.06 max	0.15-0.35	12.00-14.00	Rem

Diameters
Ø< 2.00 mm: cold drawn and polished
Ø>= 2.00mm: cold drawn, ground and polished. Surface roughness N6-N7

Availability
In rods, bars, standard length 3m (2m) and in coil

Tolerances
h8 more accurate tolerances on request

Mechanical properties
Tensile strength at delivery form 650-850 N/mm 2
After annealing 500-700 N/mm 2

Heat Treatment
Hardening in oil 950 to 1000 ºC, content of carbon must be above 0.9%
tempering 600-700 ºC

Maximum hardness
43 HRC

Cutting rate
40 to 65 m/mm depending on the lubrication oil, the cutting tool, the shape of parts etc.

Standard Stock
most current dimensions from 0.80 to 13m round (English sizes 1/4", 1/8")

Return to Main Precision Ground Material

Customer Reviews - What Customers Say About Us!

"Just wanted to say thanks for your efforts and updates"

"I always try you as you often keep stock that can't be found elsewhere"

"Prompt answer & knowledge of available material, timescale & price within a good time"

"Packaging is superb"

"Thank you for your quick response"

CLICK HERE TO VIEW OUR BROCHURE

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.