Part Number WS 1.4125
Technical Data Sheet
Chronifer M-17C is a hardenable stainless chromium steel which is manufactured in Rod, Bar and Coil. (AISI 440C ~ Stainless Steel).
| Chemical Composition Limits | |||||||
| Weight % | C | Cr | Mo | Si | Mn | S | Fe |
| CHRONIFER M-17C | 0.95-1.20 | 16-18 | 0.80 max | 1.00 max | 1.00 max | 0.015 max | Rem |
| Other Chemically similar Specifications | |||||||
| Weight % | C | Cr | Mo | Si | Mn | S | Fe |
| WS 1.4125 | 0.95-1.20 | 16-18 | 0.80 max | 1.00 max | 1.00 max | 0.015 max | Rem |
| X 105 CrMo 17 | 0.95-1.20 | 16-18 | 0.80 max | 1.00 max | 1.00 max | 0.015 max | Rem |
| AISI 440C~ | 0.95-1.20 | 16-18 | 0.80 max | 1.00 max | 1.00 max | 0.015 max | Rem |
Material Features
High carbon chromium steel designed to provide stainless properties with maximum hardness. After heat treatment type 440C attains the highest hardness of any stainless steel (about 60 HRC). This stainless steel principally has been used in bearing assemblies including bearing balls and races. In addition, it should be considered for cutlery, needle valves, ball check valves, etc.
Availability
Coil: Cold drawn and polished: 10-35kg/coil
Bars: Ø 0-1.99mm : Cold drawn and polished
Bars Ø 2.00-16mm: Cold drawn, ground and polished.
Bars Length
in 3m 92m) Surface roundness N5-N6
Standard Tolerances
Diameter h8 (h7)
Out of roundness/cylindricity: 1/2 of dia tolerance
Tolerance in length :+/- 30mm
Tensile Strength
Before heat treatment: depending on the diagram 750-950n/mm2
Heat Treatment
Hardening: 1030-1070ºC
Soft Annealing: 843-871ºC slow furnace cooling
Max obtainable hardness 60 HRC
Cutting Rate
15-25 m/min (approximate value, depending on the lubrication oil, the cutting tools, the shape of parts)
For all stock and size availability contact Sales.
Return to Main Precision Ground Material
Customer Reviews - What Customers Say About Us!
| CLICK HERE TO VIEW OUR BROCHURE |
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
