Nickel Alloy 105 /Nimonic 105®
Technical Data Sheet
Alloy 105 is a wrought nickel-colbalt-chromium base alloy which also contains molybdenum, aluminium and titanium which results in a high strength alloy that can be used in conditions up to 950°C with good creep resistance. Alloy 105 is used for turbine blades, discs, forgings, ring sections, bolts and fasteners.
| Chemical Composition Limits | |||||||||||||||
| Weight% | C | Si | Cu | Fe | Mn | Cr | Ti | Al | Co | Mo | Pb | S | B | Zr | Ni |
| Alloy 105 | 0.12 | 1.0 | 0.2 | 1.0 | 1.0 | 14-15.7 | 0.9-1.5 | 4.5-5.5 | 18-22 | 4.5-5.5 | 0.0015 | 0.010 | 0.003-0.010 | 0.15 | bal |
Availability
Alloy 105 is available in Round Bar, Flat Bar, Rod, Billet. For all stock availability contact Sales
Specifications
BS HR3
WS 2.4634
MSRR 7017
MSRR 7018
Nimonic 105 (trademark)
Customer Reviews - What Customers Say About Us!
| CLICK HERE TO VIEW OUR BROCHURE |
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
