Stainless Steel 304
Technical Data Sheet
| Chemical Composition Limits | |||||||||
| Weight% | Cr | Ni | Mn | Si | Mo | C | P | S | Ti |
| 304 | 18-20 | 8-11 | 2.00 | 0.75 | - | 0.080 | 0.040 | 0.030 | - |
| 304L | 18-20 | 8-13 | 2.00 | 0.75 | - | 0.035 | 0.040 | 0.030 | - |
Typical Mechanical Properties
| Grade | Tensile Strength Rm N/mm² |
Yield Strength Rp 0.2, N/mm² | Elongation (%) |
| 304 Annealed | 500-700 | 195 | 40 |
| 304L Annealed | 460-680 | 180 | 40 |
Availability
Stainless Steel 304 is available in Capillary tube, Instrument tube, Precision tube and Hydraulic tube. Stainless Steel 304 can also be supplied in Coiled Tube with a seamless and welded execution.
Stainless Steel 304 Capillary tube can be either harddrawn (hardness 260-330 HV) or annealed (hardness <180 HV). The tolerances are according to DIN 17458/ISO 1127 D4/T3. We can also supply Welded/ Redrawn (in the same conditions).
Capillary tubes can be supplied with various point styles : Blunt end - square cut /Chamfered edge / Radiused/ Tapered. Flat ground-point, Back cut bevel, Lancet level, Closed round end, Flared end and Threaded end.
For all stock availability contact Sales.
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
Sell your Stock Online at 4metal.co.uk
