Stainless Steel 15-5PH (AMS 5659/ AMS 5862)
Technical Data Sheet
| Chemical Composition Limits | ||||||||||
| Weight% | C | Si | Mn | P+S max | Cr | Ni | Cu | Cb | Fe | Mo |
| AMS 5659 15-5 |
0.07 | 1.0 | 1.0 | 0.03P 0.015S |
14.0-15.50 | 3.50-4.50 | 2.50-4.50 | 0.45 | Bal | 0.50 |
Alloy 15-5 is a precipitation hardening alloy exhibiting high strength and hardness with moderate corrosion resistance. Alloy 15-5 is a variant of the older 17-4 and 15-5 was designed to have greater toughness than S17400, especially in the through-thickness (short transverse) direction. Alloy 15-5 is used in applications that require high transverse strength and toughness such as engine parts, aircraft components, nuclear reactor components etc.
Typical Mechanical Properties
| Material | Condition |
Ultimate Tensile Strength (ksi) | 0.2 % Yield Strength (ksi) | Elongation % in 2D | % Reduction of Area | Rockwell C Hardness |
| Alloy 15-5 PH Bar AMS 5659 |
Cond A | - | - | - | - | 363 HB max |
| Alloy 15-5 PH Bar AMS 5659 |
H900 | 190 | 170 | 10 | 35 | 388-444 |
| Alloy 15-5 PH Bar AMS 5659 |
H925 | 170 | 155 | 10 | 38 | 375-429 |
| Alloy 15-5 PH Bar AMS 5659 |
H1025 | 155 | 145 | 12 | 45 | 331-401 |
| Alloy 15-5 PH Bar AMS 5659 |
H1075 | 145 | 125 | 13 | 45 | 311-375 |
| Alloy 15-5 PH Bar AMS 5659 |
H1100 | 140 | 115 | 14 | 45 | 302-363 |
| Alloy 15-5 PH Bar AMS 5659 |
H1150 | 135 | 105 | 16 | 50 | 277-352 |
| Material | Condition |
Ultimate Tensile Strength (ksi) | 0.2 % Yield Strength (ksi) | Elongation % in 2D | % Reduction of Area | Rockwell C Hardness |
| Alloy 15-5 PH Sheet/Plate AMS 5862 |
Cond A | - | - | - | - | 38 max |
| Alloy 15-5 PH Sheet/Plate AMS 5862 |
H900 | 190 | 170 | 5 | - | 40-47 |
| Alloy 15-5 PH Sheet/Plate AMS 5862 |
H925 | 170 | 155 | 5 | - | 38-45 |
| Alloy 15-5 PH Sheet/Plate AMS 5862 |
H1025 | 155 | 145 | 5 | - | 35-42 |
| Alloy 15-5 PH Sheet/Plate AMS 5862 |
H1075 | 145 | 125 | 5 | - | 33-39 |
| Alloy 15-5 PH Sheet/Plate AMS 5862 |
H1100 | 140 | 115 | 5 | - | 32-38 |
| Alloy 15-5 PH Sheet/Plate AMS 5862 |
H1150 | 135 | 105 | 8 | - | 28-37 |
Availability
15-5 is available in Bar, Forgings, Tube, Wire, Rings, Sheet, Strip and Plate. View Stock List, Plate Stock List or contact Sales for further availability.
Specifications
15-5 ESR to the following specifications:
AMS 5659 TYPE 2
ASTM-A-484
UNS-S15500
15-5 PH VAC MELT to the following specifications:
AMS 5659 TYPE 1
ASTM-A-484
15-5 VM COND H-1025 to the following specifications
AMS-5659 T-1 (COND H-1025)
AMS-H-6875
ASTM-A-484
ASTM-A-564 TYPE XM-12 (COND H-1025)
15-5 VM COND H-1050 to the following specifications
AMS-5659 T-1 (EXC. COND)
AMS-H-6875
ASTM-A-484
ASTM-A-564 TYPE XM-12 (EXC. COND)
BAC-5619 (150-170 MIN. TENS.)
AMS 5862 Sheet, Strip and Plate.
AMS 5826 Welding Wire
UNS : S15500
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
Sell your Stock Online at 4metal.co.uk
