Aluminium Alloy 5052


Technical Data Sheet

 

Chemical Composition Limits
Weight% Al Cu Si Fe Mn Mg Zn Cr Others
5052 Bal 0.10 max 0.25 max 0.40 max 0.10 max 2.2 / 2.8 0.10 max 0.15 / 0.35 max 0.05 max (each)
0.15 (total)

Aluminum 5052 is one of the higher strength non-heat treatable alloys (Annealed it is stronger than 1100 and 3003). Alloy 5052 has excellent characteristics with a high fatigue strength it is used for structures which are subject to excessive vibrations. As 5052 also has excellent corrosion resistance, especially in marine atmospheres and is therefore commonly used in boats, marine components, fuel and oil tubing.

Typical Mechanical Properties

 

Material Temper Tensile Strength (ksi) Yield Strength (ksi) Elongation % in 2" min bend radius (90° cold forming)
5052 Sheet
0.064" thick
5052-0 25-31 9.5 19 0
5052 Sheet
0.064" thick
5052-H32 31-38 23 7 1t
5052 Sheet
0.064" thick
5052-H34 34-41 26 6 1 1/2 t

Availability
Aluminum 5052 is available in Coil, Sheet, Plate, Wire. 5052 Foil (Shim) is available in various thicknesses. View stock list for further information Foil Stock List . For all other stock availability of Aluminium Alloy 5052 contact Sales.

Specifications
5052 -0
AMS 4015J Sheet, Plate, Foil
AMS 4069C Tube
AMS 4070K Tube
AMS 4071 Hydraulic Tube
UNS A95052
QQ-A-250/8

5052 H-32
AMS 4016J
UNS A95052
QQ-A-250/8

5052 H34
AMS 4017J
QQ-A-250/8

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.