Part Number WS 1.4034+S


Technical Data Sheet

Chemical Composition Limits
Weight % C Si Mn Cr S Mo Fe
CHRONIFER LABOR M-13 0.40-0.50 1.60 max 1.00 max 12.50-14.50 0.20 max 0.60 max Rem
Other Chemically similar Specifications
Weight % C Si Mn Cr S Mo Fe
WS 1.4034 + S 0.40-0.50 1.60 max 1.00 max 12.50-14.50 0.20 max 0.60 max Rem
DIN X 46 CrS 13 0.40-0.50 1.60 max 1.00 max 12.50-14.50 0.20 max 0.60 max Rem
AISI 420F~ 0.40-0.50 1.60 max 1.00 max 12.50-14.50 0.20 max 0.60 max Rem

Chronifer Labor M-13 is a hardenable alloyed free cutting stainless steel which is manufactured in rod, bar and coil. (AISI 420F ~ Stainless Steel). For all stock and size availability contact Sales.

Material Properties
This product is a compromise between good machinability (S-Content), high wear resistance (Cr-content) and possibility for hardening (C-Content. Chronifer Labor M 13 resists to corrosion after tempering and a forced polishing of the parts.

Availability
Coils: cold drawn and polished, 10-35kg/coil
Bars: 0-1.99 mm: cold drawn and polished
Bars: 2.00-40mm: cold drawn, ground and polished
Bars length: 2m or 3m surface roughness N5-N6

Standard Tolerances
Diameter: ISO h8 (Ø 3-10mm h7)
Length of bars: +/- 30mm
Out of Roundness/eccentricity: 1/2 of diameter

Heat Treatment
Soft annealing: 750-800C slow furnace cooling (2-4 hours)
Hardening: 1000-1050 C
Max obtainable hardness 55 HRC

Cutting Rate
40-55 m/min (approximate value, depending on the lubrication, the cutting tools, the shape of parts)

Return to Main Precision Ground Material

 

More News ........ Cutting Capabilities Expanded
We have a brand new 3 metre Guillotine. Take a look:
Aircraft Materials Metal Cutting Durma VS 3006

 

 

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.