Alloy 99


Technical Data Sheet

 

Chemical Composition Limits
Weight% C Mn Si Ni S Fe Cu OET
Alloy 99 1.0 max 2.5 max 0.75 max 90 min 0.03 max 4 max 4 max 1 max

Alloy Nickel 99 is used for the welding of cast irons. This filler metal is extensively employed to repair cast irons. It can also be used for overlay and buildup. However, dilution from the castings influences the mechanical properties of the metal. The welds of the Nickel 99 are easily machinable. A preheat and interpass temperature of 350ºF (175ºC) minimum is recommended during welding.

Typical Mechanical Properties

Material Ultimate Tensile Strength Offset Yield Strength 0.2 % Elongation (%)
psi MPa psi MPa
Alloy 99 66,500 460 36,000 250 40

Availability
Nickel Alloy 99 is available in TIG, MIG and SUB-ARC wire used for welding. For all stock availability contact Sales.

Specifications
AWS 5.14
ASME SFA 5.14
AWS ERNiCr-3
UNS N06082

Return to Main Welding Page

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.