Stainless Steel ER 309 / ER 309L


Technical Data Sheet

 

Chemical Composition Limits
Weight% C Mn Si Cr Ni S P Mo Cu
ER 309
ER 309L		 0.03 max 1.0-2.5 0.30-0.65 23-25 12-14 0.03 max 0.03 max 0.75 max 0.75 max

Alloy ER 309L is of similar composition as ER 309 except for the carbon content being lower than 0.03%. This lower carbon content reduces the possibility of intergranular carbide precipitation. This increases the resistance of intergranular corrosion without the use of stabilizers such as columbium (niobium) or titanium. Strength of this low-carbon alloy; however, may not be as great at elevated temperatures as that of the columbium (niobium)-stabilized alloys or ER309. ER 309L is preferred over ER 309 for cladding over carbon or low alloy steels, as well as for dissimilar joints that undergo heat treatment.

Typical Mechanical Properties

Material Ultimate Tensile Strength Offset Yield Strength 0.2 % Elongation (%)
psi MPa psi MPa
ER 309/ ER 309L 85,550 590 58,000 400 40


Availability
Alloy ER 309/309L is a Stainless Steel TIG, MIG and SUB-ARC wire used for welding. For all stock availability contact Sales.

Specifications
AWS 5.9
ASME SFA 5.9
AWS ER 309/309L
UNS S30983

Return to Main Welding Page

Customer Reviews - What Customers Say About Us!

"Just wanted to say thanks for your efforts and updates"
"I always try you as you often keep stock that can't be found elsewhere"
"Prompt answer & knowledge of available material, timescale & price within a good time"
"Packaging is superb"
"Thank you for your quick response"
  CLICK HERE TO VIEW OUR BROCHURE  

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.