Stainless Steel ER 316H


Technical Data Sheet

 

Chemical Composition Limits
Weight% C Mn Si Cr Ni S P Mo Cu
ER 316
ER 316H
0.04-0.08 1.0-2.5 0.30-0.65 18-20 11-14 0.03 max 0.03 max 2-3 0.75 max

Alloy ER 316H is used for welding 316H base metal. This filler metal is the same as ER 316, except that the allowable carbon content has been restricted to the higher portion of the 316 range. Carbon content in the range of 0.04 to 0.08 wt.% provides higher strength at elevated temperatures.

Typical Mechanical Properties

Material Ultimate Tensile Strength Offset Yield Strength 0.2 % Elongation (%)
psi MPa psi MPa
ER 316 / ER 316H 84,100 580 58,000 400 38


Availability
Alloy ER 316/ ER 316H is a Stainless Steel TIG, MIG and SUB-ARC wire used for welding. For all stock availability contact Sales.

Specifications
AWS 5.9
ASME SFA 5.9
AWS ER 316/ ER 316H
UNS S31680

Return to Main Welding Page

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.