Aluminium Alloy 5251 / N4
Technical Data Sheet
Chemical Composition Limits | |||||||||
Weight% | Si | Fe | Cu | Mn | Cr | Mg | Zn | Ti | Others |
5251 | 0.40 max | 0.50 max | 0.15 max | 0.10-0.50 | 0.15 max | 1.70 -2.4 | 0.15 max | 0.15 max | 0.05 (each) 0.15 (total) |
Typical Mechanical Properties
Material | Temper | Thickness (mm) | Tensile Strength (N/mm²) | Yield Strength (N/mm²) mm | Elongation on 50mm | ||||
0.5 mm | 0.8 mm | 1.3 mm | 2.6 mm | 3.0 mm | |||||
5251 Sheet | 0 | 0.2 - 6.0 | 160-200 | 60 | 18 | 18 | 18 | 20 | 20 |
5251 Sheet | H22 | 0.2 - 6.0 | 200-240 | 130 | 4 | 5 | 6 | 8 | 8 |
5251 Sheet | H24 | 0.2-12.5 | 225-275 | 175 | 3 | 4 | 5 | 5 | 5 |
5251 Sheet | H28 | 0.2-3.0 | 255-285 | 215 | 2 | 3 | 3 | 4 | 4 |
Availability
Aluminium Alloy 5251 N4 is available in Sheet, Bar and Wire. For all stock availability of Aluminium Alloy 5251 contact Sales.
What's new.......... More News ........ Cutting Capabilities Expanded COVID-19 Statement (read full statement here) |
|
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.