Aluminium Alloy BS L163 2014A-T3 Clad Sheet
Technical Data Sheet
| Chemical Composition Limits | ||||||||||
| Weight% | Si | Fe | Cu | Mn | Cr | Mg | Ni | Zn | Ti+Zr | Ti |
| Alloy L163 | 0.50 - 0.90 | 0.50 max | 3.9 - 5.0 | 0.4 - 1.2 | 0.10 max | 0.2 - 0.8 | 0.10 max | 0.25 max | 0.20 max | 0.15 max |
Typical Mechanical Properties
| Grade | Condition | 0.2% Proof Stress (MPa) | Tensile Strength (MPa) | Elongation (%) |
| Alloy L163 | results from 1.6 - 6.0mm T3 | 250 | 390 min | 7 |
Availability
Aluminium Alloy L163 is available in Sheet and Strip T3 Clad 1050A. For all stock availability of Aluminium L163 contact Sales.
Specifications
Similar Specification
2014A
Clad 1050A
What's new.......... Or why not ..... Join our Mailing List |
|
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
