 |
Our warehouse will shut from Mon 23rd Dec and open again Thurs 2nd Jan |
Aluminium Alloy 2014 / 2014A
Technical Data Sheet
Aluminium Alloy 2014 (2014 A) is a copper based alloy with very high strength together with excellent machining characteristics. Alloy 2014 is commonly used in many aerospace structural applications due to its high strength. Other applications include military vehicles, bridges, weapons manufacture and structural applications.
| Chemical Composition Limits | |||||||||||||
| Weight% | Al | Si | Fe | Cu | Mn | Cr | Mg | Ni | Zn | Ti+Zr | Ti | Other Each | Other Total |
| Alloy 2014a AECMA | Rem | 0.50 - 0.90 | 0.50 max | 3.9 - 5.0 | 0.4-1.2 | 0.10 max | 0.2-0.8 | 0.1 max | 0.25 max | 0.20 max | 0.15 max | 0.05 max | 0.15 max |
| Alloy 2014 USA | Rem | 0.50-1.20 | 0.7 max | 3.9 - 5.0 | 0.4 - 1.2 | 0.10 max | 0.2-0.8 | - | 0.25 max | - | 0.15 max | 0.05 max | 0.15 max |
Typical Mechanical Properties
| Material | Temper | Thickness (mm) | Tensile Strength min (N/mm²) | Yield Strength min (N/mm²) | Elongation in 50 mm | ||||
| 0.5 mm | 0.8 mm | 1.3 mm | 2.6 mm | 3.0 mm | |||||
| Alloy 2014 Sheet | T4 Bare | 0.2-6.0 | 400 | 225 | 13 | 14 | 14 | 14 | 14 |
| Alloy 2014 Sheet | T6 Bare | 0.2-6.0 | 440 | 380 | 6 | 6 | 7 | 7 | 8 |
| Alloy 2014 Sheet | T4 Clad | 0.2-1.6 | 385 | 240 | 13 | 14 | 14 | - | - |
| Alloy 2014 Sheet | T4 Clad | 1.6-6.0 | 395 | 245 | - | - | - | 14 | 14 |
| Alloy 2014 Sheet | T6 Clad | 0.2-1.6 | 420 | 345 | 7 | 7 | 8 | - | - |
| Alloy 2014 Sheet | T6 Clad | 1.6-6.0 | 420 | 355 | - | - | - | 9 | 9 |
| Material | Temper | Diameter (mm) | Tensile Strength min ((N/mm²) | Yield Strength (min) (N/mm²) | Elongation on 5.65 V (min) |
| Alloy 2014 Bar | T4 | <20 | 370 | 230 | 11 |
| Alloy 2014 Bar | T4 | 20-75 | 390 | 250 | 11 |
| Alloy 2014 Bar | T4 | 75-150 | 390 | 250 | 9 |
| Alloy 2014 Bar | T4 | 150-200 | 370 | 230 | 8 |
| Alloy 2014 Bar | T6510 | 20-75 | 480 | 435 | 7 |
| Alloy 2014 Bar | T6510 | 75-150 | 465 | 420 | 7 |
| Alloy 2014 Bar | T6510 | 150-200 | 435 | 390 | 7 |
Availability
Aluminium Alloy 2014 (2014A) is available in Bar, Sheet, Strip, Plate, Wire, Tube, Drawn Tube, Forging Stock and Rivet Stock. For all stock availability of Aluminium 2014 contact Sales.
Specifications
UNS A92014
Werkstoff Nr. 3.1255
Werkstoff Nr. 3.1254
AMS 4028 Sheet and Plate - Alloy 2014 T0
AMS 4029 Sheet and Plate - Alloy 2014 T651
AMS 4121 Bars, Rods, Wire (rolled or cold finished) - Alloy 2014 T6
AMS 4133 Forgings, Rolled Rings - Alloy 2014 T6
AMS 4134 Die Forgings - Alloy 2014 T4
AMS 4135 Superseded by 4133 Forgings, Rolled Rings - Alloy 2014 T6
AMS 4153 Extrusions - Alloy 2014 T6
BS 7L37 Rivet Stock
BS 3L63 Tube
BS 2L77 Forging Stock T6 Temper
BS 2L87 Bars and Sections T6 Temper
BS 2L93 Plate Alloy 2014A
BS L102 Bars and Sections T4 Temper
BS L103 Forging Stock T4 Temper
BS L105 Tube T4 Temper S07-1011, S07-1012
BS L156 Sheet and Strip T4 Temper
BS L157 Sheet and Strip T6 Temper
BS L158 Sheet and Strip T4 Temper Close Tolerance.
BS L159 Sheet and Strip T6 Temper Close Tolerance.
BS L163 Clad Sheet and Strip T3 Temper
BS L163 Clad Sheet and Strip T4 Temper
BS L164 Clad Sheet and Strip
BS L165 Clad Sheet and Strip T6 Temper
BS L166 Clad Sheet and Strip T4 Temper Close Tolerance.
BS L167 Clad Sheet and Strip T6 Temper close Tolerance.
BS L168 Bars and Sections T6, T6510 and T6511
BS H15, HS15, HP15, HT15, HE15.
AlCu4SiMg
A-U4SG
QQ-A-200/2
QQ-A-225/4
QQ-A-250/3
DTD 5010, Alloy 2014A
DTD 5030, DTD 5040
EN 2087
EN 2088
EN 2089 SHEET
EN 2395 SHEET
EN 2100 BAR T4511, EN 2634 BAR T4511
EN 2324 BAR, EN 2639 BAR, EN 2384, EN2635 T6, T6511
EN 2634 (with peripheral coarse grain control)
EN 2639 (with peripheral coarse grain control)
EN 2635 (with peripheral coarse grain control)
AECMA 2387
Similar Specification
BS H15
Alcan GB-26S
AWCO-305
Birmetal-478
BA 305 and BA 355
Durcilium-K
Hiduminium-66
Avional-660 and Avional-662
BAEM 0039, BAEM 0128 and BAEM 0173
MIL-A-12545
Customer Reviews - What Customers Say About Us!
| CLICK HERE TO VIEW OUR BROCHURE |
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
