Stainless Steel ER 410NiMo
Technical Data Sheet
Chemical Composition Limits | |||||||||
Weight% | C | Mn | Si | Cr | Ni | S | P | Mo | Cu |
ER 410NiMo | 0.06 max | 0.6 max | 0.5 max | 11-12.5 | 4-5 | 0.03 max | 0.03 max | 0.4-0.7 | 0.75 max |
Alloy ER 410NiMo is used primarily to weld cast and wrought material of similar chemical composition. Preheating and interpass temperature of not less than 300ºF is required. Post-weld treatment should not exceed 1150ºF, as higher temperatures may result in hardening.
Typical Mechanical Properties
Material | Ultimate Tensile Strength | Offset Yield Strength 0.2 % | Elongation (%) | ||
psi | MPa | psi | MPa | ||
ER 410NiMo | 118,900 | 820 | 91,350 | 630 | 20 |
Availability
Alloy ER 410NiMo is a Stainless Steel TIG, MIG and SUB-ARC wire used for welding. For all stock availability contact Sales.
Specifications
AWS 5.9
ASME SFA 5.9
AWS ER 410NiMo
UNS S41086
What's new.......... Or why not ..... Join our Mailing List |
|
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.